Products
YG005A Electronic Single Fiber Strength Tester (Pneumatic)

Scope of application

The electronic single fiber strength tester is used to test the tensile physical properties of various fibers and metal superfine wires in the dry state (wet state).

Related standards

GB/T9997 GB/T14337 ISO5079 ISO11566

technical parameter

1. *Large load test: 100cN 300cN 500cN

2. Load test error: 0.02% (F.S)

3. Load test sensitivity: 0.01cN

4. *Large elongation measurement range: 400mm (large test stroke)

5. Resolution of elongation measurement: 0.01mm

6. Zero drift: 0.2%(F.S)

7. Lower gripper descending speed: 1199mm/min (digital setting)

8. Lowering speed error: 1%

9. The rising speed of the lower gripper: 100mm/min

10. Power supply: AC220V±10%, 50Hz

11. Dimensions: 430×320×680mm (L×W×H)

12. Weight: about 35kg